Six Sigma Quality International

This document gives guidelines for assisting organizations in establishing, documenting, implementing, maintaining and continually improving material circulation in their design and development in a systematic manner, using an environmental management system (EMS) framework.

These guidelines are intended to be used by those organizations that implement an EMS in accordance with ISO 14001. The guidelines can also help in integrating material circulation strategies in design and development when using other management systems. The guidelines can be applied to any organization regardless of its size or activity.

This document provides guidelines for design strategies on material circulation to achieve the material efficiency objectives of an organization, by focusing on the following aspects:

— type and quantity of materials in products;

— product lifetime extension;

— recovery of products, parts and materials.

In design and development, many aspects are considered, such as safety, energy efficiency, performance and cost. Although important, they are not addressed in this document.

System UkrSEPRO has exclusive rights to the recognition of certification results in other countries to meet the requirements of normative documents of Ukraine. As a result, the certificate is issued or a certificate of conformity.

     Ukraine has concluded bilateral intergovernmental agreement on mutual recognition of certification results. These agreements were concluded with the countries - former republics of the Soviet Union, with which Ukraine has a common (harmonized) legal framework. They are: Russian Federation, Belarus, Uzbekistan, Armenia, Kyrgyz Republic, Georgia, Azerbaijan, Kazakhstan, Turkmenistan, Republic of Moldova Republic of Tajikistan. It should be emphasized that the recognition of conformity certificates issued by these countries, is made only for products manufactured in this country. That is, the system UkrSEPRO does not provide for recognition of conformity certificates issued by, for example, in Russia, the products produced, such as Europe.

It should be noted that certificates of compliance can be recognized, mostly for party products entering the customs territory of Ukraine, with the issued Certificate of Recognition.

     May recognize the certification tests, then examined the production or certification (assessment) quality management system can issue certificates of conformity for products for a period of 2 years or 5 years without taking a certification test.

     In all cases, recognition is possible and done in the case of coincidence of regulatory documents.

     The work on recognition of the results of product certification in the OS are available:

     • an application for works to recognize the results of product certification;

     • a set of documents in accordance with the list of documents submitted with the application for recognition of the results of product certification in the countries mentioned above.

The Qatar Ministry of Environment’s (MOE) Qatar General Organization for Standards and Metrology (QGOSM) has implemented a pre-shipment verification of conformity scheme to protect the public against substandard products and prohibit entry to debased and fake products. The scheme requires all regulated imported products as defined by QGOSM, to be accompanied by certificate of conformity issued by an approved third party.

We are approved as a third party company to conduct an assessment against the standards and on successful completion issue a certificate of conformity (CoC) for the export of regulated products to Qatar. Application for assessment and a CoC should be made by the exporter in the country of supply. We will verify:

• The description and specification of the goods
• The conformity with the relevant Qatari standards and Qatari Technical Regulations or their approved Gulf or International standards

A Certificate of Conformity shall be issued once the evaluation results in a ‘SATISFACTORY’ result against the Qatari requirements.

The following products are the regulated in the Qatari conformity program:

1. Brake Pads
2. Safety Belts
3. Wheel Rims
4. Electric Irons
5. Exhaust Fans
6. Hair Dryers

With decades of experience managing conformity assessment programs, we offers exporters efficient and comprehensive solutions to ensure shipments conform to Qatar’s requirements.

The UL EPH Marks appears as above.

The EPH Listed Mark is typically used for products complying with UL’s own published Standards for Safety. The EPH Classified Mark is used for products complying with ANSI/NSF standards and other food equipment hygiene codes and requirements.

The UL Enhanced and Smart Marks for environmental and public health certification of food equipment appear .

An optional QR code may also appear in these marks.

This document defines a process to identify, assess, control, and monitor the risks associated with hazardous biological materials. This document is applicable to any laboratory or other organization that works with, stores, transports, and/or disposes of hazardous biological materials. This document is intended to complement existing International Standards for laboratories.

This document is not intended for laboratories that test for the presence of microorganisms and/or toxins in food or feedstuffs. This document is not intended for the management of risks from the use of genetically modified crops in agriculture.

Full title: ISO/IEC 33001:2015 — Information Technology — Process Assessment — Concepts and Terminology

So, ISO/IEC 33001 does exist — but note that it is part of the ISO/IEC (Information Technology) standards, not industrial management like ISO 9001.

ISO/IEC 33001:2015 provides the foundational concepts and terminology used in process assessment frameworks for information technology and software development.

It sets the basis for:

• Assessing process capability

• Improving process performance

• Comparing organizational maturity

• Software development and IT service companies

• Organizations implementing CMMI-like maturity models

• Enterprises seeking to benchmark or improve process capability

• Consultants performing process capability assessments under ISO/IEC 330xx standards

A company developing software might use ISO/IEC 33001 as the conceptual base and ISO/IEC 33020 to measure their process maturity from Level 1 (Performed) to Level 5 (Optimizing).

The standard is divided roughly into three main parts (clauses) after initial definitions:

ISO/IEC 19941:2017 specifies cloud computing interoperability and portability types, the relationship and interactions between these two cross-cutting aspects of cloud computing and common terminology and concepts used to discuss interoperability and portability, particularly relating to cloud services.

ISO/IEC 19941:2017 is related to other standards, namely, ISO/IEC 17788, ISO/IEC 17789, ISO/IEC 19086‑1, ISO/IEC 19944, and in particular, references the cross-cutting aspects and components identified in ISO/IEC 17788 and ISO/IEC 17789 respectively

This document provides guidance on the assessment of governance of information technology (IT) based on the principles, definitions and model for the governance of IT outlined in ISO/IEC 38500 and ISO/IEC TR 38502 and the implementation considerations outlined in ISO/IEC TS 38501.

This document includes approaches for conducting the assessment, the criteria against which the assessment can be made, guidance on the evidence that can be used for the assessment, as well as a method for determining the maturity of the organization’s governance of IT.

This document is applicable to organizations of all sizes, regardless of the extent of their use of IT.

ISO 14025:2006 establishes the principles and specifies the procedures for developing Type III environmental declaration programmes and Type III environmental declarations. It specifically establishes the use of the ISO 14040 series of standards in the development of Type III environmental declaration programmes and Type III environmental declarations.

This document specifies a transport protocol and network layer services tailored to meet the requirements of LIN‑based vehicle network systems on local interconnect networks. The protocol specifies an unconfirmed communication.

The LIN protocol supports the standardized service primitive interface as specified in ISO 14229-2.

This document provides the transport protocol and network layer services to support different application layer implementations such as:

—     normal communication messages, and

—     diagnostic communication messages.

The transport layer defines transportation of data that is contained in one or more frames. The transport layer messages are transported by diagnostic frames. A standardized API is specified for the transport layer.

This document defines key terminology, establishes circular economy principles, and provides guidance for its implementation by using a framework and areas of action.

It is intended to be used by organizations seeking to understand and commit to a circular economy while contributing to sustainable development. These organizations can be either private or public, acting individually or collectively, regardless of type or size, and located in any jurisdiction, or position within a specific value chain or value network.

ISO 14045:2012 describes the principles, requirements and guidelines for eco-efficiency assessment for product systems including:

1. the goal and scope definition of the eco-efficiency assessment;
2. the environmental assessment;
3. the product-system-value assessment;
4. the quantification of eco-efficiency;
5. interpretation (including quality assurance);
6. reporting;
7. critical review of the eco-efficiency assessment.

Requirements, recommendations and guidelines for specific choices of categories of environmental impact and values are not included. The intended application of the eco-efficiency assessment is considered during the goal and scope definition phase, but the actual use of the results is outside the scope of ISO 14045:2012.

ISO 14026:2017 provides principles, requirements and guidelines for footprint communications for products addressing areas of concern relating to the environment.

ISO 14026:2017 also provides requirements and guidelines for footprint communication programmes, as well as requirements for verification procedures.

ISO 14026:2017 does not address the quantification of a footprint, nor does it address the communication of footprints that are not related to the environment, e.g. footprints addressing social or economic issues. In particular, footprint communications relating to the economic and social dimensions of sustainable development are outside the scope of ISO 14026:2017. Footprint communications relating to organizations are also outside the scope of ISO 14026:2017.

ISO 14052:2017 provides guidance for the practical implementation of material flow cost accounting (MFCA) in a supply chain. MFCA fundamentally traces the flows and stocks of materials within an organization, quantifies these material flows in physical units (e.g. mass, volume) and evaluates the costs associated with material flows and energy uses. MFCA is applicable to any organization that uses materials and energy, regardless of its products, services, size, structure, location, and existing management and accounting systems. In principle, MFCA can be applied as an environmental management accounting tool in the supply chain, both upstream and downstream, and can help to develop an integrated approach for improving material and energy efficiency in the supply chain.

ISO 14052:2017 is based on the principles and general framework for MFCA described in ISO 14051.

The MFCA framework presented in this document includes scenarios for improving material and energy efficiency in a supply chain, principles for successful application of MFCA in a supply chain, information sharing, and practical steps for the implementation of MFCA in a supply chain.

This document gives guidelines for organizations on determining the environmental costs and benefits associated with their environmental aspects. It addresses the dependencies of an organization on the environment, for example, natural resources, and the context in which the organization operates or is located. Environmental costs and benefits can be expressed quantitatively, in both non-monetary and monetary terms, or qualitatively.

This document also provides guidance for organizations when disclosing related information.

This document takes an anthropocentric perspective, i.e. looking at changes that affect human wellbeing (utility) including their concern for, and dependence on, nature and ecosystem services. This includes use and non-use values as reflected in the concept of total economic value when environmental costs and benefits are determined in monetary terms.

The ways in which the environmental costs and benefits are used after they have been determined are outside the scope of this document.

This document is applicable to any organization regardless of size, type and nature.

This document specifies the non-invasive attack mitigation test metrics for determining conformance to the requirements specified in ISO/IEC 19790:2012 for security levels 3 and 4. The test metrics are associated with the security functions addressed in ISO/IEC 19790:2012. Testing is conducted at the defined boundary of the cryptographic module and the inputs/outputs available at its defined boundary.

This document is intended to be used in conjunction with ISO/IEC 24759:2017 to demonstrate conformance to ISO/IEC 19790:2012.

This document specifies how to extend the specifications in ISO 32000-2 by adding support for the use of the Secure Hash Algorithm – 3 (SHA-3) and SHAKE256 hash algorithms.

This document does not specify the following:

—    specific processes for converting paper or electronic documents to the PDF file format;

—    specific technical design, user interface implementation, or operational details of rendering;

—    specific physical methods of storing these documents such as media and storage conditions;

—    methods for validating the conformance of PDF files or PDF processors;

—    required computer hardware and/or operating system

UL’s Marks for our Classification service appear on representative samples of products that UL has evaluated with respect to specific properties, a limited range of hazards or suitability for use under limited or special conditions.

There are also multiple variations of marks for UL’s Classification service, some of which are used in the United States, others used in Canada and still others used in both markets. Products carrying marks for Canada have been evaluated to Canadian standards for a specific hazard or property. A combination mark indicates compliance with both Canadian and U.S. requirements.

In the Classification service, UL determines that a manufacturer has demonstrated the ability to produce a product complying with UL’s requirements with respect to one or more of the following:

• Specific risk, e.g., casualty, fire, etc.
• Performance under specific conditions
• Compliance with regulatory codes
• Compliance with specific standards such as international standards
• Other condition, as determined by UL

All of the products carrying these marks are covered by UL’s Follow-Up Services program to determine that they continue to be manufactured in compliance with UL’s requirements.

There are two options for the marks for UL’s Classification service.

The UL Classification Marking appearing on a product typically consists of four required elements:

• UL in a circle symbol
• Word Classified
• Product name or company name/file number
• Issue/serial number or alphanumeric control number

Information identifying the scope of UL’s certification will also appear on the product.

The UL Enhanced and Smart Marks for the United States and Canada for the Classification service consist of:

• The basic Enhanced Mark
• SAFETY attribute
• ISO country code of CA for Canada or US for the United States, or both CA and US
• Unique identifier
• Optional QR code for the smart version

Information identifying the scope of UL’s certification will also appear on the product.

Additionally, a product name and issue/serial number or alphanumeric 

ISO/IEC TR 29138-2:2009 identifies a collection of documents (which it refers to as standards even though they encompass more than traditional ISO and ISO/IEC standards) that provides guidance on meeting the needs of people with disabilities. While its primary audience is standards developers, it can also be helpful for developers of information technology products and services, policy makers, procurers and for accessibility advocates to consider.

In addition to identifying user needs, ISO/IEC TR 29138-2:2009 identifies problems that people with disabilities experience with information technologies that lead to these user needs and identifies the relationship of these user needs with the accessibility factors for standards developers to consider found in ISO/IEC Guide 71: Guidelines to address the needs of older persons and people with disabilities when developing standards.

ISO 14044:2006 specifies requirements and provides guidelines for life cycle assessment (LCA) including: definition of the goal and scope of the LCA, the life cycle inventory analysis (LCI) phase, the life cycle impact assessment (LCIA) phase, the life cycle interpretation phase, reporting and critical review of the LCA, limitations of the LCA, relationship between the LCA phases, and conditions for use of value choices and optional elements.

ISO 14044:2006 covers life cycle assessment (LCA) studies and life cycle inventory (LCI) studies.

ISO/IEC 19941:2017 specifies cloud computing interoperability and portability types, the relationship and interactions between these two cross-cutting aspects of cloud computing and common terminology and concepts used to discuss interoperability and portability, particularly relating to cloud services.

ISO/IEC 19941:2017 is related to other standards, namely, ISO/IEC 17788, ISO/IEC 17789, ISO/IEC 19086‑1, ISO/IEC 19944, and in particular, references the cross-cutting aspects and components identified in ISO/IEC 17788 and ISO/IEC 17789 respectively.

• For most vehicle manufacturers, certification is a mandatory requirement that is internationally recognized - helping to do business worldwide.

• The specification is based on ISO 9001 and encourages a process approach. Understanding the inter-relationship of processes through the use of the standard can enable improved product and process quality and ultimately avoids variation in the supply chain.

• SO /TS 16949 is based on ISO 9001, making the process approach easy to adopt and integrate with other key management systems including ISO 14001 Environment and OHSAS 18001 Occupational Health and Safety. It also complements many existing business improvement tools, such as FMEA, PPAP and Six Sigma.

• Certification can provide additional confidence and consistency to all interested parties in global sourcing, enabling greater business opportunities and attracting more investment prospects.

• For suppliers to a number of different vehicle manufacturers, certification to ISO/TS 16949 avoids the need for multiple certificates, thereby eliminating duplication in preparation and documentation as well as second- and third-party audits.

What you will gain:
Higher Effectiveness and Efficiency on their JobExcellent
Career Enhancement Opportunity
Internationally Recognized Qualification
Photo-identity Card from ASCB(Europe) Ltd. - UKListing among an International list of Quality Professionals.

Established in the year 2000, at Mumbai, Maharashtra, India, we “Deming Certification Services Pvt. Ltd.,” offer clients total certifications solutions that helps in enhancing systems and processes at their end. Further, the expertise of certifications personnel also assist us in changing the working pattern of several organizations by bringing positive change in their work culture as well as inculcating quality in every sphere of involved operations.

The solutions offered by us cover areas like ISO 9001 Certification, ISO 27001 Certification, ISO 14001Certification, SQC/SPC Certification, ISO 17025 Certification and ISO 22000 Certification. Apart from this, we also offer solutions for HACCP Certification, ISO/TS 16949 Certification, OHSAS 18001, Social Accountability Certification, Risk Assessment Services, ISO 20000 Certification, Project ManagementCertification, SA 8001 Certification and Third Party Inspection and Verification Services.

Our business operations are led by Mr. Mukesh Singh, who has with him rich experience in our industry sector. His visionary approach has also assisted us in emerging amongst fastest growing business management certification companies in our industry sector. Further, the service support provided by experienced industry professionals also allow us to offer clients a wide range of business certifications services for availing different certifications.

Today, our team of experts work in close coordination with clients and help them to access their specific requirements as well as add value to their systems. This is achieved through designing formats as well as assisting in implementation by continuous training, review of quality manual as well as undertaking other allied procedures. Other than this, the competitive prices of our services also makes them one of the most demanded in the market.

The Recognized Component Functional Safety Marks are specifically used on components that are part of larger products or systems intended to partially fulfill the functional safety requirements of the system. The Functional Safety Component Recognition will streamline the functional safety investigation of the final product/system since the component will have already been partially prequalified for the intended use.

For Functional Safety Recognized Components, manufacturers will provide instructions that include component ratings, application restrictions and intended safety level, such as Safety Integrity Level (SIL), Automotive Safety Integrity Level (ASIL), Performance Level (PL) or Class.

These components may have restrictions on their performance or may be incomplete in construction. Guidelines addressing the suitability of a component when used in an end product are noted in UL’s test report as conditions of acceptability.The suitability of the use of a functional safety component in a certain situation or for a particular safety level (SIL, ASIL, PL or Class) must be further evaluated within the context of the end-use application.

Just as with the UL Recognized Component Mark, there are three variations of UL’s Functional Safety Recognized Component Mark: one for the United States, one for Canada only and one for both the United States and Canada.

All components carrying the UL Functional Safety Recognized Component Mark are covered by UL’s Follow-Up Services program to determine continued compliance with UL’s requirements.

UL’s marks for the marine certification service appear on products that have been evaluated specifically for marine use. Products bearing these marks have been evaluated to UL’s published marine Standards for Safety and other applicable standards and codes. Requirements for marine certification address hazards that can occur as a result of exposure to harsh marine environments such as vibration, impact, ignition protection, water ingress and salt spray corrosion common on pleasure craft and boats. Examples of the types of products carrying UL’s marks for marine certification include alternators, battery chargers/power inverters, navigation lights, fuel tanks, filters and pumps.

There are two mark options for UL’s marine certification service.

The UL Enhanced and Smart Marks for marine certification appear .

An optional QR code may also appear in these marks.

When REACH is fully in force, it will require all companies manufacturing or importing chemical substances into the European Union in quantities of one tonne or more per year to register these substances with a new European Chemicals Agency (ECHA) in Telakkakatu (Helsinki)  Finland. Since REACH applies to some substances that are contained in objects (articles in REACH terminology), any company importing goods into Europe could be affected.

The European Chemicals Agency has set three major deadlines for registration of chemicals. In general these are determined by tonnage manufactured or imported, with 1000 tonnes/a. being required to be registered by 1 December 2010, 100 tonnes/a. by 1 June 2013 and 1 tonne/a. by 1 June 2018.In addition, chemicals of higher concern or toxicity also have to meet the 2010 deadline.

About 143,000 chemical substances marketed in the European Union were pre-registered by the 1 December 2008 deadline. Although pre-registering was not mandatory, it allows potential registrants much more time before they have to fully register. Supply of substances to the European market which have not been pre-registered or registered is illegal (known in REACH as "no data, no market").

The European Commission supports businesses affected by REACH by handing out – free of charge – a software application (IUCLID) that simplifies capturing, managing, and submitting data on chemical properties and effects. Such submission is a mandatory part of the registration process. Under certain circumstances the performance of a chemical safety assessment (CSA) is mandatory and a chemical safety report (CSR) assuring the safe use of the substance has to be submitted with the dossier. Dossier submission is done using the web-based software REACH-IT.

The aim of REACH is to improve the protection of human health and the environment by identification of the intrinsic properties of chemical substances. At the same time, innovative capability and competitiveness of the EU chemicals industry should be enhanced.

ISO/IEC 38500:2015 provides guiding principles for members of governing bodies of organizations (which can comprise owners, directors, partners, executive managers, or similar) on the effective, efficient, and acceptable use of information technology (IT) within their organizations.

It also provides guidance to those advising, informing, or assisting governing bodies. They include the following:

• executive managers;
• members of groups monitoring the resources within the organization;
• external business or technical specialists, such as legal or accounting specialists, retail or industrial associations, or professional bodies;
• internal and external service providers (including consultants);
• auditors.

ISO/IEC 38500:2015 applies to the governance of the organization's current and future use of IT including management processes and decisions related to the current and future use of IT. These processes can be controlled by IT specialists within the organization, external service providers, or business units within the organization.

This document specifies requirements for an organization to establish, implement, maintain and continually improve a service management system (SMS). The requirements specified in this document include the planning, design, transition, delivery and improvement of services to meet the service requirements and deliver value. This document can be used by:

a) a customer seeking services and requiring assurance regarding the quality of those services;

b) a customer requiring a consistent approach to the service lifecycle by all its service providers, including those in a supply chain;

c) an organization to demonstrate its capability for the planning, design, transition, delivery and improvement of services;

d) an organization to monitor, measure and review its SMS and the services;

e) an organization to improve the planning, design, transition, delivery and improvement of services through effective implementation and operation of an SMS;

f) an organization or other party performing conformity assessments against the requirements specified in this document;

g) a provider of training or advice in service management.